For a printable PDF version of this chart follow this link: Line Driver Comparison
For graphs showing the clipping behavior of OutSmarts versus the competition see Line Driver Clipping Behavior.
| THAT1646 OutSmarts |
THAT1606 OutSmarts |
ADI SSM2142 |
TI DRV134 |
TI DRV135 |
Units | ||
| Output Noise | 600 Ω Bal. load |
-101 | -101 | -93.4 | -97* | -97* | dBu |
| Tames clipping into single-ended loads |
Yes | Yes | No | No | No | — | |
| THD+N Balanced 1 kHz, Typ 20 kHz, Typ 20 kHz, Max Single- ended 20 kHz, Typ 20 kHz, Max |
10 VRMS 600 Ω |
0.0007 0.002 0.005 0.003 0.006 |
0.0007 0.002 0.005 0.003 0.006 |
0.0008 0.004 No Spec 0.008** No Spec |
0.0005 0.0014 No Spec 0.01** No Spec |
0.0005 0.0014 No Spec 0.01** No Spec |
% |
| Slew Rate | 15 | 15 | 15 | 15 | 15 | V/µs | |
| Gain | RL=100kΩ RL=600Ω |
+ 6.0 + 5.3 |
+ 6.0 + 5.3 |
+ 6.7 + 6.0 |
+ 6.7 + 6.0 |
+ 6.7 + 6.0 |
dB |
| Packaging Options | DIP-8 SO-16 W SO-8 Low θJA QSOP-16 |
Yes Yes Yes No |
No No No Yes |
Yes Yes No No |
Yes Yes No No |
No No Yes No |
— |
| Datasheet | 1606/1646 Datasheet |
1606/1646 Datasheet |
— | — | — | — |
*Datasheet says -98 dBu; **Not specified by TI or ADI, figures based on THAT measurements.